Skip to main content

AirFlo Explosion Proof Radial Pressure Blower 4 inch Inlet / 4 inch Outlet 345 CFM at 1" SP 1 Phase NHADP8-C-1-E

Model:
NHADP8-C-1E
Brand:
National Fan Co.
Build Time:
5 Weeks ?
Ships By:
Freight

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

LIST: $1,496.20
You save 9% ($140.20)
Your Price: $1,356.00
Quantity Unit Price You Save
3-5 4%
6+ 7%

NOTE: HAZARDOUS LOCATION FANS ARE SPECIAL NON-STOCK ITEMS AND CANNOT BE RETURNED OR CANCELLED.

Designed for use in situations requiring moderate CFM movement against relatively high static pressure systems. Excellent for fume exhaust, mounted on dust collectors, non-abrasive material conveying, vehicle exhaust removal in garages and fire departments, air source for air knives, and combustion air for gas burners.

MOTOR CLASSIFICATION
Class 1, Division 1, Group D
Class 2, Division 1, Group F & G

FEATURES
Cast aluminum housing and wheels are naturally non-sparking and meet AMCA Type B spark resistant construction
Round outlets and inlets facilitate connection to standard pipe and duct diameters with slip fit connections or flange to flange
Six housing sizes and multiple wheel diameters provide a wide range of available performance ratings
Suitable for use in air streams to a maximum of 150°F
Most sizes available in clockwise or counter-clockwise rotation with eight different discharge positions
Standard Construction meets AMCA Type C spark resistant requirements with an Explosion Proof Motor
All models run at 3450 RPM

Model No.:
NHADP8 -C -1 -E -CW -BH
Voltage:
115 / 230
Warehouse:
Multiple
Made In U.S.A.:
Yes
Type:
Explosion Proof Fans
Blade Size (Inches):
8
CFM Low:
242
CFM High:
345
Decibels (dBA):
80 @ 5'
Dimension Inches:
Width: 15" Depth: 21" Height: 16"
Hertz:
60
Drive Type:
Direct
Horsepower:
1/2
Limited Warranty:
1 Year Limited
Motor Type:
Explosion Proof
RPM High:
3450
Phase:
1
Speed(s):
1
Weight lbs.:
85
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Ask a Question
  • I saw the fan is marked Class I, Division 1, Group D Class II, Division 1, Group F&G *NOTE - All models run at 3450 RPM. possible to have it T3C and thermistor for VFD application? possible to have a label with max/mn possible Hz indicated? possible to have motor datasheet and explosionproof certificate in advance to check with the customer if OK? Andrea

    Explosion proof motors are not designed to be anything other than single speed (not variable speed).

  • Can we get these in 6"?

    Here is a link to an explosion proof pressure blower unit with a 6" inlet and 5" outlet: https://www.industrialfansdirect.com/collections/explosion-proof-fans/products/nhadp10d-1e

  • will this run off a 120 volt plug.... I see the motor is 115/230 volt rated; but sometimes this can mean that you need to run to hots (each 115 volt for a total of 230v) to run it

    Yes you can use a 120v plug with this unit. 
    Note: plug must be expolosion proof if it is being plugged in the hazardous location room.