* FAN IS PICTURED WITH REAR SLEEVE AND BACK GUARD - STANDARD MODEL ONLY, OR IT MAY BE ORDERED WITH FRONT SLEEVE AND SHUTTER (NO REAR SLEEVE AND BACK GUARD) OR IT MAY BE ORDERED WITH CABINET GUARD AND SHUTTER (NO REAR SLEEVE AND BACK GUARD).

The Model HVA wall exhaust fan is designed for general ventilation in heavy duty commercial and industrial applications. Heavy duty airfoil-cast aluminum or anti-static glass reinforced nylon blades are standard on HVA series fans providing maximum performance at low sound levels. Cast aluminum airfoil blades are available on 24 - 48: sizes. Electro anti-static glass reinforced nylon blades are available on 54 - 60" sizes.

These fans are typically used for high volume, high static pressure applications. The HVA is designed and constructed for efficient and economical operations while maximizing performance for heavy duty applications. This fan is used for exhaust applications. Please consult factory for supply applications.

* Fan blades are tested in accordance with AMCA standard 210, figure 12

FEATURES:

• Heavy gauge steel fan panel with deep spun and flared venturi for maximum efficiency.
#149Heavy gauge, welded steel motor and bearing supports.
•Balanced cast aluminum airfoil blades (24" - 48")
•Electric anti-static glass reinforced nylon blades available in 54" - 60"
•Heavy duty cast iron pillow block bearings.
•TEFC motors are standard.
• 115/230 Volts 1-Phase (230V only on 3HP and above).
• 208/230/460 Volts 3-Phase

1 SPEED

TYPE =EXHAUST

DRIVE = BELT

SPEED(s) = 1

HP = 5

PHASE = 1

BLADE DIA. (in) = 30

MNT POS = Wall

CFM = 18,410

VOLTAGE = 230v

AMPS = 22.0

NO. OF BLADES = 6

RPM = 1,635

WARRANTY = 1 YEAR

WEIGHT (lbs) = 229

MOTOR ENCLO. =TEFC

dBA @ 5 ft = 78

DIMENSIONS: CABINET GUARD & SHUTTER (CBS)

A = 35 7/8"

B = 30"

C = 2 1/4"

D = 26"

DIMENSIONS: FRONT SLEEVE & SHUTTER (SLS)

A = 35 7/8"

B = 30"

C = 2 1/4"

D = 19 1/2"

E = 12 1/2"

DIMENSIONS: REAR SLEEVE & BACK GUARD (SLB)

A = 35 7/8"

B = 17"*

C = 3 3/4"

*For 5 HP and up, add 5 1/2" -+ For 15 HP and 20 HP, add 4"